IMPORTANT
- Children must not be allowed near the motor.
- If an electrical extension is used it must be a triple wired , earthed cord
- Do not cover motor with bag or tight material – it needs air
- Do not leave motor in rain/water – it’s an electrical appliance
- Do not switch the motor on and off
- Castle should be at least 1 meter away from walls or objects that can damage the castle – NB clients pay for damages
- No pets, shoes, sharp objects streamers or food allowed on the castle
- No adults allowed on the jumping castles – it will damage as it is not made for above 80 kg.
- Adults are only allowed on slip slides
- The air pipe feeds the air to the castle.
- It needs to be securely attached to the motor so air does not escape
- The pipe must not be bend or twisted - this will restrict airflow to the castle.
|
Setting up the castle
- Put the castle where you intend to use it
- Roll the castle out of the bag and look for the air pipe (long PVC pipe, at the back or on the side of the castle)
- Attach the motor to the air pipe and fasten tight. The motor must be upright - standing on its “leg”
- Attach extension to motor – must be a tripled wired, earthed cord
- Plug extension directly into the power source and switch on electricity
- The motor needs to run continuously for the castle to stay inflated.
Folding the castle
- Remove motor from the castle.
- Straighten the air pipe and hold so that the air can escape (tip: let someone walk on the castle and the air will escape faster
- Most castles with a pond have a short air pipe underneath the pond. Open this air pipe as well
- Fold all loose parts to the inside
- Fold castle in such a way that it ends up narrow and long. (same width as the bag)
- Put bag underneath castle on the one side and roll the castle tightly towards the bag.
Once inside the bag close with the attached ropes. |
Trouble shooting
Motor
- Electricity keep on tripping when motor is switched on.
- Motor starts but cut out
Do the following to eliminate possible causes/solve the problem:
- Take motor and plug directly into power source (no extension or other plugs) - if still problem
- Take motor to another power source and plug in
- Plug motor into power source – ensure that no other appliances use the same plug/line.
- If you do use an extension ensure that the extension is a tripled wired, earthed cord, not longer than 15m
Jumping Castle
Jumping castle not stiff:
- Check that the air pipe is attached tight to the motor – no air escaping
- Check that the pipe underneath the pond is closed properly
- Ensure that air pipe is straight with no obstructions
- It is normal that bubbles and air escape from the seams
- Small holes is not a problem. If you can put 3 fingers in a hole please phone
|